ATS / AMF Panel

Denyo recommended ATS panel will start up your generator in case of a power cut-off and shut it off when power is resumed. It is designed to work with a generator transfer switch, creating a fully automatic back-up power for your needs.

This panel is easy to install and all adjustments are made by using the keypad located on the front. This panel can be mounted on the wall or as stand alone making installation much easier.

Fully automated startup which does not require the presence of an operator to operate the generator.

In the event of generator’s engine emergency shutdown, e.g. Low oil pressure, High water temp failure and etc. ATS will be activated and faults will be shown on the panel’s controller to allow operator to remedy accordingly.